Content | Peritoneal dialysis involves surgery to implant a peritoneal dialysis (PD) catheter into your abdomen. The catheter helps filter your blood through the peritoneum, a membrane in your abdomen. During treatment, a special fluid called dialysate flows into the peritoneum. The dialysate absorbs waste. Once the dialysate draws waste out of the bloodstream, it’s drained from your abdomen.
This process takes a few hours and needs to be repeated four to six times per day. However, the exchange of fluids can be performed while you’re sleeping or awake.
There are numerous different types of peritoneal dialysis. The main ones are:
- Continuous ambulatory peritoneal dialysis (CAPD). In CAPD, your abdomen is filled and drained multiple times each day. This method doesn’t require a machine and must be performed while awake.
- Continuous cycling peritoneal dialysis (CCPD). CCPD uses a machine to cycle the fluid in and out of your abdomen. It’s usually done at night while you sleep.
- Intermittent peritoneal dialysis (IPD). This treatment is usually performed in the hospital, though it may be performed at home. It uses the same machine as CCPD, but the process takes longer.
| Stainless Steel Blood Bank Refrigerator (+4°C)
The Blood Bank Refrigerator is a specialized refrigerating equipment for blood (whole blood) storage application, which has been used in medical industries as well as cold storage of pharmaceuticals, biological products, vaccine, and so forth.it is suitable for hospitals, blood banks and sanitation and ant epidemic stations.
Control System:
-Microprocessor-based temperature controller. Temperature range 4±1°C, with temperature printer standard.
-Large screen LCD display of temperature, display accuracy of +/- 0.1°C.
-Automatic temperature control, Defrost automatic
-Audible and visual alarm: High or low temperature alarm, Door ajar alarm, system failure alarm, power failure alarm, low battery alarm.
-Power supply: 220V 50Hz 1 phase, can be changed as 220V 60HZ or 110V 50/60HZ
Structure Design:
-Upright type, Exterior made from painted steel plate, Inside is stainless steel.
-Four units Caster are mounted under the bottom
-Three-layer glass door with heater around to prevent ice leak, and lockable.
-Interior fluorescent light
-Inner is shelves (wire plastics). 3units for ABR-88L, 4units for ABR-268L, 5units for ABR-358L, 6units for ABR-588L.
-Temperature printer is standard, Optional chart recorder, blood storage basket.
Refrigeration System:
-Forced air circulation system
-International Famous compressor and Germany EBM fan motors
-The high-effective air-cooled condenser and the fin-type evaporator
-Refrigerant as R134a, CFC free
-Certificate: CE mark, ISO9001, ISO14001, ISO13485
Specifications:
Model |
Capacity (L) |
External size
(D*W*H)mm |
Interior size
(D*W*H)mm |
Blood capacity |
Weight
(KG) |
ABR-88L |
88 |
500*450*1515 |
402*343*663 |
450ml/bag*40-50/bags |
90/100 |
ABR-268L |
268 |
700*628*1662 |
512*518*973 |
450ml/bag*100-140/bags |
160/170 |
ABR-358L |
358 |
700*628*1962 |
512*515*1270 |
450ml/bag*180-220/bags |
200/210 |
ABR-588L |
588 |
800*760*1977 |
550*560*1260 |
450ml/bag*250-300/bags |
230/240 |
| Mammography System
Features:
New appearance, There are three large size full color LCD screen on the machine, and one 8 inch LCD touch screen on the console.
Main Parameters:
Three different X-ray tubes to choose:
-- Hangzhou LR01 tube from China
-- IAE C339V tube from Italy
-- VARIAN B115 tube from America
- X-ray Generator
Complete solid-state high-frequency high-voltage generator.
Generator Type: High Frequency Inverter 80kHz
Input Power: Single phase 220VAC, 50/60Hz
Radiographic Ratings: Large Focal Point 20-35kV/10-510mAs
Small Focal Point 20-35kV/10-100mAs
Power Rating: 6.2kW
- X-ray Tube
1) Hangzhou LR01 tube from China
Focal Spot Size: Dual Focus 0.2 / 0.4mm
Target Material:Molybdenum (Mo)
Port Material:Beryllium (Be)
High-speed anode drive: 2800/1000rpm
Target angle: 12°/12°
Anode Heat Storage: 100KJ (150kHU)
Anode Cooling:Air cooling
Filtration: Mo(0.03mm),Al(0.5mm)
2) IAE C339V tube from Italy
Focal Spot Size: Dual Focus 0.1/0.3mm
Target Material: Molybdenum (Mo)
Port Material: Beryllium (Be)
High-speed anode drive: 2800/1000rpm
Target angle: 10°/16°
Anode Heat Storage: 210kJ (300kHU)
Anode Cooling: Air cooling
Filtration: Mo(0.03mm), Al(0.5mm)
3) VARIAN B115 tube from America
Focal Spot Size: Dual Focus 0.1/0.3mm
Target Material: Molybdenum (Mo)
Port Material: Beryllium (Be)
High-speed anode drive: 2800/1000rpm
Target angle: 10°/16°
Anode Heat Storage: 210kJ (300kHU)
Anode Cooling: Air cooling
Filtration: Mo(0.03mm),Al(0.5mm)
- Radiographic Stand
C-ARM: Vertical Movement: 590mm
Center of electric rotating C-arm, automatic return function by one key
Automatically released after the exposure pressure settings display
Compression flexible stepless speed.
Max. pressure: 200N
Max. travel: 150mm
Rotations Deg:+90°~-90°
SID: 650mm
- Cassette Image Receptor
18*24cm (24cm*30cm optional)
Bucky Device: 18*24cm Bucky drive mechanism,(24cm*30cm optional)
Grid Ratio: 5:1, 30 Line/cm
- Line Voltage
220Vac@25A, Single phase
- Weight and Size:
240kg(Gross weight: 340kg)
L*W×H: 940mm*560mm*2000mm
Upgrading:
Above introduction for ARI-9800D is an analog mammography, actually, it can be upgraded into a DR system. Here is the main parameters for digital mammography.
Main Parameters for Full Digital Mammography System |
Name |
Parameters |
Specialized Digital Flat Panel Detector for Mammography |
Detector, Power Box, Date Line, Capture Card, etc |
Effective Coverage of Detector |
23*15cm, 29*23cm |
Pixel Matrix |
3072*1944, 3888*3072 |
Limit of Spatial Resolution |
6.0Lp/mm |
DQE Value |
70% |
Dynamic Range |
14bit digital output |
Pixel Size |
75um |
High Voltage Synchronizer |
BNC |
Output |
Camera Link or Ethernet |
Working Condition |
10-40℃ |
Storage Environment |
-10-50℃ |
Bucky |
Housing and Movement Device |
Size |
370*275*125cm |
Stepless Speed Regulating Range |
0-6cm/s |
Movement Range |
0.5-2cm |
Grid |
Size |
24*30cm |
Grid Ratio |
3.5:1 |
Focal Distance |
65cm |
Software |
Workstation |
Standard Detector Image Acquisition Workstation |
CPU≥Intel Duo Core 2.60GHz |
Hardware≥250G |
Memory≥2G |
Display Card≥512MB |
19’’ High Brightness High Contrast LCD, 1280*1024 Pixel Resolution |
Network Interface Worklist |
DICOM3.0 Transmission |
100/1000 Gigabit Ethernet |
| Portable Slit Lamp
AME-5S2 Portable Slit Lamp Microscope is produced with high illumination white LED, and can be used about 5 to 6 hours continuously after fully recharged. The net weight is 750 g only, so that very convenient to be carried. And very proud that it is the very initial and most advanced portable model in China.
Microscope type: Binocular crossed stereo microscope
Total Magnification:
|
10 x Eyepiece |
16 x Eyepiece |
1 x Objective |
10 |
16 |
Diopter compensation:-7D~+7D
Working distance:80mm
Slit width:10mm
Slit height:10mm
Diameter of light spot:10mm
Filter: heating absorption, 50%ND,Red-free,blue
Illumination Rotator Angle: horizontal ±30 degree
Illumination: White LED
Input Voltage: AC 100~240V 60~50HZ
Input Power: 18VA | Product features
BFV-263 two kinds of imaging mode, one-click switching freely, Auto-sleep function.
Two kinds of imaging modes: blue & white, red & green, one-click switching freely;
Image performance optimization, adjustable brightness, high accurate;
Medical cold light, safe for your eyes;
Sleep function, more comfortable operation elegant design, easy to carry.
Product description
Vein finder is developed by Best man Instrument independently. It is non-contact imaging device of subcutaneous vein and belongs to the internal power supply equipment. It uses the safety cold light, positioning the subcutaneous veins on the surface of patient's skin. BVF-260 is easy to detect veins at the back of the hands through transmission of LED red light and it can assist medical staff to observe sub-cutaneous veins of hands and significantly improve the success rate of the injection It is suitable for hospitals, Clinics, homes as well as any other places to find the veins for injection. | Quick Details
Type: Hospital Furniture
Specific Use: Hospital Table
General Use: Commercial Furniture
Material: Metal
Metal Type: Stainless Steel
Folded: No
Size: 600*400*750-1050mm
Brand Name: WCM
Model Number: WCM-F-F124
Product Name: Stainless Steel Mayo Table Operation Instrument Trolley
Color: customizable
Feature: Adjustable
Accessories: wheels
|
Reviews
There are no reviews yet.