| Description | The Blood Bank Refrigerator is a specialized refrigerating equipment for blood (whole blood) storage application. | | Nurse Wear, Attendant Wear, Hospital Staff Wear | Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. | BVF-260 is easy to detect veins at the back of the hands through transmission of LED red light and it can assist medical staff to observe sub-cutaneous veins of hands and significantly improve the success rate of the injection It is suitable for hospitals | Hemodialysis is the most common type of dialysis. This process uses an artificial kidney (hemodialyzer) to remove waste and extra fluid from the blood. |
| Content | Stainless Steel Blood Bank Refrigerator (+4°C)
The Blood Bank Refrigerator is a specialized refrigerating equipment for blood (whole blood) storage application, which has been used in medical industries as well as cold storage of pharmaceuticals, biological products, vaccine, and so forth.it is suitable for hospitals, blood banks and sanitation and ant epidemic stations.
Control System:
-Microprocessor-based temperature controller. Temperature range 4±1°C, with temperature printer standard.
-Large screen LCD display of temperature, display accuracy of +/- 0.1°C.
-Automatic temperature control, Defrost automatic
-Audible and visual alarm: High or low temperature alarm, Door ajar alarm, system failure alarm, power failure alarm, low battery alarm.
-Power supply: 220V 50Hz 1 phase, can be changed as 220V 60HZ or 110V 50/60HZ
Structure Design:
-Upright type, Exterior made from painted steel plate, Inside is stainless steel.
-Four units Caster are mounted under the bottom
-Three-layer glass door with heater around to prevent ice leak, and lockable.
-Interior fluorescent light
-Inner is shelves (wire plastics). 3units for ABR-88L, 4units for ABR-268L, 5units for ABR-358L, 6units for ABR-588L.
-Temperature printer is standard, Optional chart recorder, blood storage basket.
Refrigeration System:
-Forced air circulation system
-International Famous compressor and Germany EBM fan motors
-The high-effective air-cooled condenser and the fin-type evaporator
-Refrigerant as R134a, CFC free
-Certificate: CE mark, ISO9001, ISO14001, ISO13485
Specifications:
| Model |
Capacity (L) |
External size
(D*W*H)mm |
Interior size
(D*W*H)mm |
Blood capacity |
Weight
(KG) |
| ABR-88L |
88 |
500*450*1515 |
402*343*663 |
450ml/bag*40-50/bags |
90/100 |
| ABR-268L |
268 |
700*628*1662 |
512*518*973 |
450ml/bag*100-140/bags |
160/170 |
| ABR-358L |
358 |
700*628*1962 |
512*515*1270 |
450ml/bag*180-220/bags |
200/210 |
| ABR-588L |
588 |
800*760*1977 |
550*560*1260 |
450ml/bag*250-300/bags |
230/240 |
| Product Description
Smart and easy to use
Over 10 patents
Innovative touchscreen with multiple background
colors for selection
Plug-in and modular design: 3 to 15 pumps can be
combined optionally to meet various clinical needs
Multiple infusion modes
Safe and accurate infusion
Dose Error Reduction System
Double CPU design, two-way independent sound-light alarm
Automatic pump door
Automatic anti-free-flow system
Total squeezing peristaltic system pump
Information network
Internal WIFI module enables the pump to connect to MP-900 directly for centralized monitoring of infusion.
— Or connect to CIS or HIS system to integrate clinical data — . | Product Specification
Size: All Sizes
Category: Doctor General Wear, Nurse Wear, Attendant Wear, Hospital Staff Wear
Material: All Materials
Type: Stitched
Sleeve Type: Long
Gender: Unisex
Usage: Hospital
Minimum Order Quantity: 50 Piece
All Colours Available | Product Specification
Brand FABMEDICALS
Shape of Framework Rectangular
Thickness of Mattress 5 cm
Mattress Material PVC
Mattress Color Black
Product Features
· Overall Size: 180 (L) x 60 (W) x 46Hcms.
· Frame work made of Rectangular / Square M.S. Tube
· Back rest section adjustable on Ratchet / Lever
· Legs fitted with PVC Stumps
· 5cm foam cushioned top covered with rexine and perineal cut
· Adjustable lithotomic poles with straps
· Finish: Epoxy powder coated
Additional Information
Delivery Time As per buyer
Port Of Dispatch New Delhi
Production Capacity 5000 units per month
Packaging Details Standard export packing
Payment Terms L/C (Letter of Credit)/T/T (Bank Transfer)/D/P/D/A | BVF-260
It is non-contact imaging device of subcutaneous vein and belongs to the internal power supply equipment. It uses the safety cold light, positioning the subcutaneous veins on the surface of patient's skin. BVF-260 is easy to detect veins at the back of the hands through transmission of LED red light and it can assist medical staff to observe sub-cutaneous veins of hands and significantly improve the success rate of the injection It is suitable for hospitals, Clinics, homes as well as any other places to find the veins for injection.
Vein Finder Function
The majority of people have highly visible veins, which enable health care providers to perform fast and accurate venous punctures. However, veins are not always visible in children because of fatty tissue. They are also difficult to locate in the elderly, in people having dark complexions or obese patients. In these instances, vein finders are beneficial to patients and medical caregivers alike.
Blood contains oxygen and nutrient-carrying hemoglobin molecules, which readily absorb infrared light. When an active infrared vein finder is applied to the skin, the vessels become visible to the naked eye, as the absorbed light in the hemoglobin make the veins appear darker, which is in high contrast compared to surrounding tissue.
Vein finding devices vary in capability. Some emit lightwaves that penetrate a few millimeters into the skin. The devices make superficial blood vessels easy to locate. Other devices emit lightwaves at higher intensities, which provide detection of deeper veins.
Passive vein finders are another option. Instead of using infrared light absorption, the eyewear devices alter the light that caregivers see by using specially filtered lenses.
What to Look for in a Vein Finder
There are a few important things that you should look for/keep in mind when searching for a vein finder.
Is it Intended for Adults or Children?
While most models can be used on both, some are usually only intended to be used on one. A vein finder that is made for children has a much lower LED light effect which is not good for adults who need more light in order to see their veins. It’s important to make sure to check before buying one to make sure you get the correct model.
Does it Have a Rechargeable Battery?
If you intend to buy an active vein finder you want to make sure it has a rechargeable battery. This can help to make sure that you don’t have to constantly keep investing in new batteries all the time in order for it to work.
It’s also a good idea to check to see how many battery packs a vein finder comes with. If it comes with one it would be good to have another one on hand that you can charge and quickly swap with the current battery pack when that certain pack needs to be recharged.
Does it Highlight Facial Veins?
Finding facial veins can be a very difficult and delicate thing for vein finders to do. Because of this, some models don’t work well with highlighting facial veins. If you intend to use a vein finder on the face, it’s a good idea to check to make sure if it has the ability to do so.
Can it be Cleaned?
Cleaning a vein finder is very important, especially if you intended to use the same product on multiple people. You want to make sure that the vein finder can be easily sanitized and won’t end up somehow damaging the product if you do so.
A Light Shield
While some vein finder models are made with a light that isn’t too irritating, some do come with very strong lights. These lights can end up irritating your eyes which will hurt them because they are so bright and strong. A light shield can help to protect your eyes when using one and can also help you to better see any veins that might show up with the device. | Hemodialysis is the most common type of dialysis. This process uses an artificial kidney (hemodialyzer) to remove waste and extra fluid from the blood. The blood is removed from the body and filtered through the artificial kidney. The filtered blood is then returned to the body with the help of a dialysis machine.
To get the blood to flow to the artificial kidney, your doctor will perform surgery to create an entrance point (vascular access) into your blood vessels. The three types of entrance points are:
- Arteriovenous (AV) fistula. This type connects an artery and a vein. It’s the preferred option.
- AV graft. This type is a looped tube.
- Vascular access catheter. This may be inserted into the large vein in your neck
Both the AV fistula and AV graft are designed for long-term dialysis treatments. People who receive AV fistulas are healed and ready to begin hemodialysis two to three months after their surgery. People who receive AV grafts are ready in two to three weeks. Catheters are designed for short-term or temporary use.
Hemodialysis treatments usually last three to five hours and are performed three times per week. However, hemodialysis treatment can also be completed in shorter, more frequent sessions.
Most hemodialysis treatments are performed at a hospital, doctor’s office, or dialysis center. The length of treatment depends on your body size, the amount of waste in your body, and the current state of your health.
After you’ve been on hemodialysis for an extended period of time, your doctor may feel that you’re ready to give yourself dialysis treatments at home. This option is more common for people who need long-term treatment. |
